The construction period is short. The aluminum formwork system is a quick release mold system. The normal construction of a set of templates can reach four days, and the construction of the line can be better, greatly improving the construction progress and saving management costs.

Less joints and high precision, the concrete surface effect after demoulding is good. After the aluminum building formwork is demolished, the quality of the concrete surface is smooth and smooth, which basically meets the requirements of the facing and the fair-faced concrete.

The number of repeated uses is high, and the average use cost is low. The aluminum formwork system adopts the aluminum alloy profile formed by integral extrusion as the original material, and a set of template specifications can be used for over 300 times. The purchase price of a set of templates is spread over a large cost compared to traditional templates.

There is less construction waste on site and the support system is simple. All parts of the aluminum formwork system can be reused. After the mold is removed, there is no garbage on the site. The support system is simple in structure and easy to remove, so the whole construction environment is safe, clean and tidy.

Convenient construction and high efficiency. The aluminum formwork system is simple and convenient to assemble. The average weight is about 20kg. It is completely handled and assembled by hand. It does not require the assistance of any mechanical equipment, and the system design is simple. The speed of the workers and the speed of the template flipping are fast. Skilled installation workers can install 20-30 square meters per person per day, which greatly saves labor costs.

Standard and versatile. There are many specifications for aluminum stencils, which can be assembled according to different specifications of the project. When using the used stencils to rebuild new buildings, only need to replace 20 non-standard plates to reduce the cost.

Good stability and high bearing capacity. Most aluminum formwork systems can reach a capacity of 60KN per square meter, which is sufficient to meet the bearing capacity requirements of most residential buildings.

High recovery value. After the aluminum formwork is scrapped, when the waste disposal residual value is high, the cost advantage is obvious.

A wide range of applications. The aluminum formwork is suitable for the use of walls, horizontal floors, columns, beams, stairs, window sills, floating boards, etc. It is also useful for secondary structural support such as ring beams, structural columns, and anti-canons.

Low carbon emission reduction. All materials of the aluminum formwork system are renewable materials, in line with national regulations on energy conservation, environmental protection, low carbon and emission reduction of construction projects.

Save cost : material 6061 T6, can be used 200-3300 times, the average cost is low.

Save construction time: All the structures can be poured one time, and the formwork can be disassabled fast, the construction can reach 4days/floor, save construction time much.

Improve construction quality: After disassable, all the concrete surface can be very clear and flat, no need to make plaster layer.

Easy construction: The assembly is easy, the average weight is 23-24kg/m2, the worker only need small tools to assemble.

Stable:  The whole structure and frame stability is good, the load capacity can be 60KN/m2.

Wide application: The product can be used for wall, stairs, column and post, beam, windowsills, etc.

Eco-friendly: No construction rubbish. And the material aluminum alloy are recycleable.

More advantages.